MN009994A01-AC
Chapter 3: Operating Instructions
Figure 1: Battery Locating Rail (shown removed)
Procedure:
1. Remove the battery locating rail by pinching inward both sides while pulling from the charger pocket.
2. Turn the battery locating rail around so the back faces the front.
NOTE: Batteries PMNN4598_ and PMNN4600_ charge with the battery locating rail in the
standard battery position.
3. Re-insert the battery into the charger pocket.
3.2
Charging Indicators
Table 4: Charging Indicators
LED Indicator
Green for approximately one second
Blinking Red
Steady Red
Blinking Yellow
Blinking Green
16
Description
Successful charger power-up.
Battery is unchargeable or not making proper con-
tact.
Battery in rapid charge mode.
●
Battery is in charger
●
Battery is waiting to be charged
Battery is charged to 90 % or greater capacity.