KTM A46001999021FAA Instrucciones De Montaje página 22

5 ASSEMBLY
5.1
Preliminary work
–
Raise the motorcycle with a lift stand (see owner's manual).
–
Remove the front wheel (see owner's manual).
–
Remove the fork legs (see owner's manual).
–
Remove start number plate (see Owner's Manual).
–
Remove the front fender (see Owner's Manual).
–
Take off the handlebar cushion.
–
Remove the lower triple clamp (see Owner's Manual).
Preassembly of upper triple clamp
–
–
–
–
–
–
8
Assembly
bp
Remove screws and bottom handlebar supports
bl
handlebar support .
bm
Remove rubber bushing and
bm
Mount rubber bushing and
bp
Mount and tighten screws
bl
supports .
Position the handlebar.
9
Mount and tighten screws
Guideline
Screw, handlebar clamp
bo
from the original triple clamp and take off top
bn
from the original triple clamp.
bn
on the upper triple clamp
together with bottom handlebar supports
bk
with top handlebar support
M8
504073-01
1
(included).
bo
and top handlebar
.
20 Nm (14.8 lbf ft)