Trouble Shooting; Fault Table - Gaggenau AW 442 Instrucciones De Uso

Trouble shooting

Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.

Fault table

Disruption
The appliance does not work
The appliance is not working, all the
buttons are flashing
The appliance is not working
The button illumination does not work
The lighting is not working
œ
The button flashes
--------
12
m
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into
the switched on LED lights for longer than 100 seconds.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a
licensed technician (electrician).
Possible cause
The plug is not plugged into the mains
Power failure
Faulty fuse
The network-cable plug is not plugged
into the mains
The circuit breaker is faulty
One of the components in the appliance
has broken
If the appliance is in operation for more
than four hours, the safety switch-off
function is activated
The control unit is faulty
The lighting is defective
The metal filter is saturated
Risk of injury!
Solution
Connect the appliance to the electricity
supply
Check whether other kitchen appliances
are working
Check in the fuse box to make sure that
the fuse for the appliance is OK
Check that the network cables of all the
appliances are connected
Look in the fuse box and check that the
circuit breakers for all the appliances are
in working order
Call the after-sales service
Switch the appliance on again
Call the after-sales service
Call the after-sales service
Clean the filter, see the
maintenance
section
Cleaning and