Publicidad
Idiomas disponibles
Idiomas disponibles
STORAGE. Keep your equipment in a enclosed place, away from dust or humidity. Don't store it neither in a garage
or in a indoor backyard, or near the water.
HUMIDITY. Dust and water could damage it and have an effect on its functioning.
BATTERY. Ensure that the battery is loaded.
SCREWS AND CONNECTING CABLES. Supervise and tighten the screws on a regular basis, because due to the
vibration the screws and nuts tend to loosen.
CLEANING. Don't use abrasive products. A damp cloth is enough.
LEVELLING. Please use the leveling wheels in case your unit has ones in order to avoid vibrations and therefore a
malfuction.
LUBRICATION. THE MOBILE PARTS OF THE MACHINE SOME SCREWS, TRANSMISSION...) MUST BE PROPERLY.
Move the equipment carefully over uneven surfaces. Do not move the equipment upstairs using the wheels, but
carry the equipment by the handlebars.
Store the equipment in a dry place with as little temperature variation as possible.
Should you need technical assistance or advise with the installation of pieces, visit our website www.isefit.com,
where you will find the section CUSTOMER CARE.
TO HELP US ASSIST YOU, PLEASE BE PREPARED TO PROVIDE THE FOLLOWING INFORMATION WHEN
CONTACTING US. Look for the identification label that will be attached to your machine. Take photos/videos.
MODEL NUMBER (REFERENCE) + SERIAL NUMBER
1
2 THE KEY NUMBER AND DESCRIPTION OF THE
REPLACEMENT PART(S)
(SEE THE PART LIST AND THE EXPLODED
DRAWING)
YOU MUST KEEP THE PURCHASE RECEIPT IN
3
ORDER TO HAVE ACCESS TO THIS SERVICE
ENGLISH
17.
8. CLEANING AND MAINTENANCE
9. MOVING THE BIKE
Move the equipment and carefully put the
equipment down. Place the equipment on
a protective base to prevent damage to
the floor surface.
10. CUSTOMER CARE
MODEL NO.: XXXXX
SERIAL Nº.: 206532020101750001
Publicidad
