ISE SY-9906 Manual De Instrucciones página 18

DISPLAY PARAMETERS
MODEL: SY-9906 (513E)
RATED VOLTAGE: 3V DC
BATTERY TYPE: 1.5V AAA*2
(DOES NOT CONTAIN THE BATTERY)
TEST STANDARD(S): EN55014-1, EN55014-2
FUNCTIONAL BUTTONS:
KEY FUNCTION:
SCAN (SCAN):
TIME (TIME):
SPEED (SPEED):
DIST (DISTANCE):
CAL (CALORIE):
ODO (ODOMETER):
HEART RATE
(IF AVAILABLE):
COMPUTER POWER ON.
When the computer powers on, the monitor will display a full screen for 1 second before entering scan mode. In scan mode, if there is no
key operation, it will automatically scan through each function every 6 seconds. If there is a key operation, it will step into that function.
During exercise, the time, speed, calorie, distance, and odometer functions will calculate their respective values. When you stop, the
computer will stop working, and the time mode will stop for 4 seconds. If there is no signal input for 4 minutes, the computer will enter sleep
mode, and the screen will power off until a signal input or key operation wakes it up.
BATTERY:
If there is a possibility of an improper display on the monitor, please replace the batteries for optimal results. This monitor requires two
"AAA" batteries, which can be replaced simultaneously.
ENGLISH
18.
SPECIFICATIONS:
TIME
SPEED
DISTANCE
CALORIE
ODOMETER
PULSE (IF HAVE)
MODE. Press to select functions.
SET (IF HAVE). To set the values of time, distance and calories when not in scan mode.
RESET (IF HAVE). Press to reset time, distance and calories.
Enter auto-scan mode to display every function in sequence. In this mode, you cannot set each
function individually. Hold this key to reset the computer. Each function will return zero except for the
total distance function.
Displays the current time of your exercise. In this mode, you can use the up or down keys to set the
duration of your exercise.
Displays the current speed at which you are exercising.
Displays the current distance you have covered during your exercise. In this mode, you can use the
up or down keys to set the distance you wish to cover.
Displays the number of calories you have burned during your exercise. In this mode, you can use the
up or down keys to set the number of calories you wish to burn.
Displays the total distance you have covered since the computer started tracking your exercise. This
mode cannot be set.
Enter the pulse test by placing your palms on both contact pads for 30 seconds. The computer will
then display your current heart rate.
11. DISPLAY INSTRUCTIONS
0:00 99:59
0.0 99.9
0.00 999.9
0.0 9999
0.0 9999
40 240
MINUTE
KM/H or MILE/H
KM or MILE
KCAL
KM or MILE
BPM