Audi 4L0019900 Manual Del Usuario página 8

4L0019900_C_EUR_Buch_1.book Seite 10 Freitag, 15. Juni 2012 9:28 09
Testing and approval in accordance with ECE R 44/04
Group Body weight
0+ up to 13 kg
0/1 0 to 18 kg
1 9-18 kg
The ISOFIX Base is designed, tested and approved in accordance
with the requirements of the European Standard for Child Safety
Equipment (ECE R 44/04). The test mark E (in a circle) and the
approval number can be found on the approval label (sticker on the
ISOFIX Base).
NOTE:
The product is only tested and approved for fastening the child seat
in the vehicle. The approval will be invalidated if any modifications
are made to the child seat.
WARNING
The product must be used only in combination with Audi child
seats.
5 Assembly
5.1 Which seats can be used?
WARNING
Danger to life!
Never fasten a rear-facing child seat on the front passenger seat if
the front passenger airbag is activated.
If, in exceptional cases, it is necessary to carry a child on the front
passenger seat, deactivate the front passenger airbag.
10
WARNING
Age range (approx.)
Birth up to 1 year Danger to life!
Observe the general information regarding the use of child seats,
1-3 years
especially in conjunction with airbag(s). This information can be
3-4 years
found in the Owner's Manual.
Always observe the country-specific legislation.
5.2 Your ISOFIX Base at a glance
Figure A
1 Support bracket
2 Adjusting knob for support bracket
3 Adjusting knobs for ISOFIX arms
4 ISOFIX arms
5 Child seat release knobs
6 Child seat mounting base
7 Release buttons for ISOFIX connectors
5.3 Installing the ISOFIX Base
5.3.1 Vehicle preparation
► Make sure that the ISOFIX fixtures on your vehicle are freely acces-
sible.
■ On certain vehicles, the ISOFIX insertion aids can aid installation
and prevent the seat cover from being damaged
■ On vehicles with folding backrests, the insertion aids must be re-
moved before folding
5.3.2 Folding out the support bracket
Figure B
► Fold out the support bracket (1).
■ The support bracket must audibly engage