IBEA Ares Manual De Usuario página 26

2.3.5 Maintenance safety
- Before carrying out any maintenance work on the machines, make sure
that the battery is not inserted in the machine housing.
- Maintenance operations must always be carried out by personnel
qualified for these specific functions.
- At the end of the maintenance and repair operations, before restarting
the machine, the technical manager must ensure that the work is
completed, the safety devices are restored and that the protections have
been reassembled.
- During maintenance or repair operations, the use of suitable protective
clothing is mandatory, such as:
Guanti Otoprotettori
The adjustments, with the safety devices disengaged or without
the guard, must be carried out by a single operator; During these
operations, unauthorized access to the machine is prohibited. Avoid
dust deposits on the machine, especially on the electric motor and
electrical parts.
2.3.6 Electrical safety
- The charger socket must be compatible with the wall socket.
- Do not cut the cable or replace the socket.
- Check the integrity of the cable.
- Do not use in humid environments and/or in case of rain or thunderstorms.
NB: Do not direct jets of water at the machine
(e.g. for cleaning), they could generate a short circuit!
2.4 Ecology and pollution
2.4.1 Waste management
The use and maintenance of the machines generate waste products
which must be disposed of in compliance with the laws in force in
the country in which the machine is used. The user of the machines is
required to comply with any manufacturers' recommendations relating
to the use of the products for the normal operation, cleaning and
maintenance of the machines. Any special waste must be disposed of
by contacting specialized and authorized companies for this purpose.
Make sure the waste is disposed of correctly by requesting a "disposal"
receipt. In case of dismantling the machine, see paragraph 4.3
26
Occhiali protettivi Elmetto Scarpe di sicurezza