AEG HE604000XB Manual De Instrucciones página 20

8.1 What to do if...
Problem
You cannot activate or operate the
hob.
Residual heat indicator does not
come on.
8.2 If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Make sure, you operated the hob
correctly. If not the servicing by a service
9. TECHNICAL DATA
9.1 Rating plate
Modell HE604000XB
Typ 60 CAD 02 ZO
Ser.Nr. .................
AEG
9.2 Cooking zones specification
Cooking zone
Left front
Left rear
Right front
Right rear
For optimal cooking results use cookware no
larger than the diameter of the cooking zone.
20 ENGLISH
Possible cause
The fuse is blown.
The zone is not hot because it op‐
erated only for a short time.
Nominal Power (Max heat setting)
[W]
2300
1200
1200
1800
Remedy
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
If the zone operated sufficiently long
to be hot, speak to an Authorised
Service Centre.
technician or dealer will not be free of charge,
also during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the guarantee
booklet.
PNC 949 595 049 00
220 - 240 V 50 - 60 Hz
Made in Germany
6.5 kW
Cooking zone diameter [mm]
210
145
145
180