Publicidad
Idiomas disponibles
Idiomas disponibles
PAIRING:
Your SEREONIC TV-Earbuds has already been paired and ready
to go right out of the box. In case that a re-pairing between the
Speaker and the Base is needed or you need to pair additional
Speakers please follow the steps described below.
TV-EARBUD S PAIRING PROCEDURE:
You can add up to 10 TV Neck Receivers to work with your Base.
You can also pair the TV-Earbuds to your existing TVSoundBox
base. If you need to re-pair your existing TVEarbuds or pair
additional TV-Earbuds to the Base, please follow the steps
below.
Make sure the Neck Receiver is fully charged.
Make sure the Base is properly connected and the green LED on
the base is NOT blinking and is steadily lit.
To pair a Neck Receiver to the Base
1.
Turn on the Neck Receive r.
11.
2.
Press the On/Off button on the side of the TV-Earbuds 10
times or until the LED indicator on the front starts blinking.
Battery Charging
& Pairing Indicator
3.
Press and hold the PAIRING button on the back of the Base
until the green LED on the base starts blinking.
AUDIO IN
OPTICAL IN
4.
As soon as pairing is successful the audio sounds will
start playing.
5.
Repeat the steps again if pairing was not successful.
Note: If you are pairing multiple neck receivers, you can
only pair one neck receiver at a time.
POWER
PAIRING
5V/1A
DIGITAL
COAXIAL IN
Pairing Button
www.sereneinnovations.com
Publicidad
