Serene Innovations SEREONIC TV-EB200 Guía De Operación página 8

C2 Analog audio RCA connection using RCA splitters:
1.
If the RCA analog audio output on the back of your TV is
taken up by another device, you'll need to purchase two
"RCA male to female splitters". These are not included in
the package.
RCA male to female splitters
(two are required)
2.
"3.5mm male to male cable" as shown below.
RCA to 3.5mm adapter
3.
Remove the existing RCA connection and take the "RCA
male to female splitters" and plug them into the RCA analog
audio output on the back of your TV or Satellite/Cable box
as shown below.
07.
Analog Audio Cord (3.5mm male to male)
4 Now take the "RCA to 3.5mm adapter" from the box and
connect it to the "RCA male to female splitters" as shown
below.
5. Take the "3.5mm male to male cable" and connect one
end of it to the "RCA to 3.5mm adapter".
6. Finally, connect the other end of the 3.5mm cable to the
Audio IN on the base.
7.
Reconnect your other device to the unused ports on the
"RCA male to female splitters as shown below
RCA male to female splitters
(Sold separately)
To other device
RCA to 3.5mm adapter
To other device
RCA audio out on Back of your TV
or Satellite/Cable Box
POWER
AUDIO IN PAIRING
5V/1A
DIGITAL
OPTICAL IN
COAXIAL IN
3.5mm male to male cable
www.sereneinnovations.com