Serene Innovations SEREONIC TV-EB200 Guía De Operación página 5

CONNECTION & SETUP:
Please follow steps 1 & 2 below to identify the type of
connection available on the back of your TV or Satellite/Cable
box to connect your Wireless TV-Eabuds. Please use only 1 type
of connection from the options listed below.
01
Identify your audio source's output options
Before you begin, you will need to identify which audio output is
available on your device (TV or Satellite/Cable box). Look for the
following output options on your device:
Optical output (also known as TOSLINK or S/PDIF)
Note: If Optical output is taken up by another device, you
may use an optical splitter (sold separately) to connect
your wireless TV speaker base. Refer to page 5 section
A2
Coaxial output
Analog audio output (Red and white RCA connection)
Note: If RCA output is taken up by another device, you
may use an RCA splitter (sold separately) to connect your
wireless TV speaker base. Refer to page 7 section C2
3.5 mm audio output (also known as an auxiliary or
headphone jack)
Copyright 2024 Serene Group, Inc. All rights reserved.
to
02 Select the appropriate input on the base
step 1, select the corresponding input on the base of your
wireless TV-Earbuds system. The base have the following input
options:
Optical input (for TOSLINK or S/PDIF)
Coaxial input
3.5mm audio input
AUDIO IN
OPTICAL IN
3.5mm audio input Optical input
POWER
PAIRING
5V/1A
DIGITAL
COAXIAL IN
Coaxial input
04.