Dreame A1 Manual Del Usuario página 12

2
Remove the LiDAR protective cover.
3
Press Stop button to open the cover of the control panel. Press and hold the Power button on the control
panel for 2 seconds to turn on A1.
Note: A1 will automatically turn on when it docks in the charging station.
4 Select the language you prefer
Turn the knob clockwise to go down and anticlockwise to go up to select your language. Press the knob to
confirm.
5 Set PIN code
1. Turn the knob to select number from 0 to 9. Turn it clockwise to increase the number from 0 to 9 and turn it
anticlockwise to decrease the number. Press the knob to set the next digit. To modify the previous digit, turn
the knob anticlockwise until the number becomes 0 and keep turning it one time more.
Note:Please do not set the PIN code to "0000".
EN 12
2s