Dreame A1 Manual Del Usuario página 29

5. Use a lint-free cloth to carefully clean the LiDAR sensor.
• Charging contacts:
Use a clean cloth to clean the charging contacts on A1 and the charging station. Keep the charging contacts
dry after cleaning.
9.2 Replacement of the components
• Replacement of the blades
To keep the blades sharp, please replace the blades regularly. It is recommended to replace the blades
every 6–8 weeks or sooner. Please only use Dreame original blades.
Warning： Please turn off A1 and wear protective gloves before replacing the blades.
Note: Please replace all three blades at the same time to ensure a balanced cutting system. Replace the
receptacles as well when replacing the blades because worn receptacles can make the blades loose and
cause injury. This ensures that all blades and receptacles wear at the same speed.
1. Turn off A1. 2. Make sure the LiDAR protective cover is on.
29 EN