Publicidad
Idiomas disponibles
Idiomas disponibles
■ Required certification markings are located inside the
film chamber.
EN
■ Cautions During Printing:
■ INSTAX SQUARE Instant Film and Print Care
This printer uses INSTAX SQUARE instant print film, sold
separately. See FUJIFILM INSTAX SQUARE instant film pack
use instructions. Follow all instructions for safe and proper
use, including:
1. Keep the film in a cool place. Do not leave the film in a
place where the temperature is extremely high (e.g., in a
closed car) for many hours.
2. Do not puncture, tear, or cut INSTAX SQUARE instant
film. If film becomes damaged, do not use.
3. When you load a film pack, use the film as soon as
possible.
4. If the film has been kept in a place where the
temperature is extremely high or low, bring it to room
temperature before loading or starting to print photos.
5. Be sure to use the film before the expiration or "Use
Before" date.
6. Avoid airport checked luggage inspection and other
strong X-ray illumination. Such exposure may cause
fogging and otherwise affect your unused film. Carrying
your printer and film onto an aircraft in your carry-on
luggage is recommended. (Check with each airport for
more information.)
10
BO17A33001-300_US.indb 10
7. Avoid exposing the developed prints to strong light, and
keep them in a cool, dry place.
8.
Do not puncture or cut the film as it contains a
small amount of caustic paste (high alkaline). Never let
children or animals put the film into their mouth. Also
pay attention so that the paste does not come into
contact with skin or clothes. If the paste inside the film
comes into contact with skin or clothes, immediately
wash off with plenty of water. If the paste comes into
contact with the eyes or mouth, immediately wash the
area with plenty of water and contact a doctor. Note that
the alkaline inside the film remains active for about 10
minutes after the photo has been printed.
2022/6/16 14:27:50
Publicidad
