Descargar Imprimir esta página

Emerio DH-128152.2 Manual De Instrucciones página 8

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 136
CONTROL PANEL
1. Power button
2. Fan speed button
3. Increasing setting button
4. Decreasing setting button
5. Mode button
6. Timer button
7. High fan speed indicator light
8. Low fan speed indicator light
9. Water tank full indicator light (It also lights up when the water tank is not properly placed.)
10. Digital display
11. Clothes drying mode indicator light
12. Dehumidification mode indicator light
13. Silence mode indicator light
14. Timer indicator light
15. Wi-Fi indicator light
BEFORE FIRST USE
To avoid any damage, place the appliance in an upright position for at least 2 hours before initiation.
After removing the packaging, make sure that the appliance is in good condition.
Do not allow children to play with the packaging materials as there is risk of suffocation.
The appliance shall be installed on a flat surface where the air inlet/outlet would not be blocked. The required
distance around the unit should be at least 30cm. To save energy, keep windows and door closed when the
appliance is running.
Note: If the dehumidifier gets interference from the household appliances, such as television and radio cassette
player, please keep the equipment away from the dehumidifier for over 70cm.
USE
Plug in the appliance.
Power button
Press the power button to turn on the appliance. Press the button again to turn off the appliance.
Mode button
Press the mode button to select your desired mode: clothes drying mode, dehumidification mode or silence
mode.
1. Clothes drying mode: the indicator light
fan speed cannot be adjusted and the unit works at high fan speed by default. The humidity cannot be set
and the room humidity is shown on the digital display.
illuminates. The compressor keeps running continuously. The
- 7 -

Publicidad

loading