Pre-Installation
PLANNING INSTALLATION
Before installing the light fixture, ensure that all parts are present. Compare parts with the Hardware Included and
Package Contents sections. If any part is missing or damaged, do not attempt to assemble, install, or operate this
light fixture.
Estimated installation time: 30 minutes
SPECIFICATIONS
Range
Sensing angle
Electrical load - LED
LED Lumens
Power requirements
LED color temperature
Operating modes
Time delay
Brightness settings
TOOLS REQUIRED
Phillips
screwdriver
Circuit tester
Ladder
Up to 50 ft. (15.2 m) (Varies with surrounding temperature)
Up to 240°
24 Watts
Hi (2000), Med (1500), Lo (1000), Eco (400), Default (2000)
120 VAC, 60 Hz
4000K
Test, Motion activated, Manual
20 seconds, 1 minute, 5 minutes (wired only)
High (Hi), Medium (Med), Low (Lo), Eco, Default
1/8 in. Flathead
screwdriver
Work gloves
Safety goggles
3
Please contact 1-866-308-3976 for further assistance.
Wire strippers/
cutters
Silicone sealant
HOMEDEPOT.COM