Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1
Determining the mounting
location
NOTE: The light fixture should be mounted approximately
8 ft. (2.4 m) above the ground. If the light fixture is
mounted higher than recommended, aiming the sensor
down will reduce the coverage area.
NOTE: Make sure there is enough space around the
mounting base to allow the light fixture to be installed.
□
Determine the mounting location – wall or eave
mount.
□
Position the lamp heads (A) in the general
direction of the desired light coverage.
2
Removing the mounting base
NOTE: This fixture comes with a mounting base. It is
pre-assembled on the light fixture for shipping.
□
Press the tab (1) on the top of the fixture toward
the lamp heads (A).
□
Slide the light fixture (B) up and out of the
mounting base (D).
Installing the mounting base
If installing the light (B) to an eave, proceed with
step 3, page 6.
B
Eave Mount
5
Wall Mount
A
C
1
If installing the light (B) to a wall, proceed to step 4,
page 6.
Wall Mount
Please contact 1-866-308-3976 for further assistance.
Eave Mount
B
B
HOMEDEPOT.COM
D
Publicidad
