Installation (continued)
7
Attaching the light fixture
NOTICE: The light fixture must fully snap into place for the light to
operate properly.
□
Using the alignment marks (5), align the two
slots (6) on each side of the light fixture's control
module (2) with the pins (7) inside the mounting
base (D).
□
Press the light fixture (B) into the mounting
base (D). Slide the light fixture (B) into the
mounting base (D) until it snaps into place.
□
Turn on the power at the circuit breaker or fuse.
Turn on the wall switch and ensure the light (B) is
working properly.
Wall Mount
B
8
Caulking around the mounting
base
CAUTION: Failure to completely caulk around the light
fixture's mounting base could result in water seepage into
the light fixture and/or junction box.
□
Once the light (B) is operating correctly, caulk
around the mounting base (D) and mounting
surface with silicone sealant (not included).
7
2
6
D
D
8
Eave Mount
D
7
B
5
6
2