Adjusting The Airflow Direction - Daikin FTK09NMVJU Operación Manual

Adjusting the Airflow Direction

NOTE
Notes on airflow direction setting
• The movable range of the flap varies according to the operation mode.
• The flap will stop at the upper position when the airflow rate is changed to low during the
up and down swing setting.
You can adjust the airflow direction to increase your comfort.
CAUTION
• Always use a remote controller to adjust the angles of the flap. Moving the flap forcibly by hand may cause a
malfunction.
• Be careful when adjusting the louvers. Inside the air outlet, a fan is rotating at a high speed.
To start auto swing
Up and down airflow direction
Press �
• " " is displayed on the LCD.
• The flap (horizontal blade) will begin to swing.
To set the flap at the desired position
• This function is effective while the flap is in auto swing mode.
Press when the flap reaches the desired
position�
• " " disappears from the LCD.
To adjust the louvers at desired position
Hold the knobs and move the louvers (vertical blades)�
FTK09NMVJU / FTK12NMVJU
FTKN09NMVJU / FTKN12NMVJU
Knobs
FTK18NMVJU / FTK24NMVJU
FTKN18NMVJU / FTKN24NMVJU
Knobs
Basic Operation
Knobs
Knobs
Movable range of the flap
COOL / DRY
FAN ONLY
14