Teka HLC840 Instalación/Mantenimiento página 32

• Clean any spillages or excess dirt, as during the pyrolytic
cleaning cycle these could ignite and become a fire hazard.
• Remove any dirt from the oven gasket.
• Carefully follow the instructions for programming the pyro-
lytic cleaning cycle.
During the pyrolytic cleaning process:
• Do not leave any cloths or fabric hanging from the oven han-
dle or in close contact with it.
• For safety reasons, if the oven has been installed below the
counter, the hob must not be in use while the oven is in py-
rolytic mode.
• The oven's inside light will remain off and cannot be turned on.
• The oven is equipped with a safety lock mechanism that pre-
vents the door from being opened during the cleaning cycle.
Do not try to open the door while the lock is activated.
INFORMATION
This manual describes general oven characteristics, and
so they may not correspond in full to those of your oven.
Consult the User's guide accompanying this manual to
learn about the specific features and equipment of your
oven.
The manufacturer reserves the right to change the prod-
uct characteristics in order to improve its operation.
32
Installation & Maintenance