RENPHO RP-FM057R Manual De Usuario página 5

Using the Product
* Do not use the device for more than 30mins each time.
* Do not stand up while massaging.
1. Attach one end of the power adapter to the adapter port and plug the other end into an
appropriate power outlet (DC 12V/2A). Once the device is plugged in, the power
indicator will flash white, indicating that the device is in standby mode.
2. Use the Touch Panel or Remote Control to operate the device.
Remove the protective film from the touch panel and the isolation strip from the remote
control before the first use.
Press to turn on/off the device.
Once the device is turned on, its power indicator will turn solid white, followed
by a beep. The Heat, Knead Intensity (Low), Air Intensity (Low) and Timer (15mins)
will be activated by default.
Press to turn on/off the heat function.
Press to cycle knead intensity level through Low, Medium, High and OFF.
Press to cycle air intensity level through Low, Medium, High and OFF.
Press to switch massage duration between 15 and 30 minutes.
Note:
1. Unplug the device after each use.
2. Each time the button is pressed, the device will emit a beep to indicate successful
operation.
3. The heat function can work only with kneading and/or air pressure function on.
4. If only the time function is enabled, the device will automatically enter standby mode after
10 seconds.
5. Once turned on again, the device will recall the default settings (Heat: On, Knead Intensity:
Low, Air Intensity: Low, Time: 15mins).
6. The device is temperature protected and will automatically shut off when the temperature
exceeds the safety limit.
7. For optimum performance of the remote control, point the remote control directly at the
touch panel while using the device.
8. To prolong the battery life, remove the battery from the remote control when not in use
for a long time.
EN DE FR IT ES
03