GYS SMART HUB MODULE Manual De Instrucciones página 15

Operating manual
MULTI-CHARGER CONFIGURATION - EQUALIZATION (EQUALIZE)
The SHM manages communication between Gysflash CNT chargers, so that battery charge levels can be equalised.
Communication
SHM
Master
Equalisation can only be carried out with identical Gysflash CNTs (maximum of 4).
Master/Sl ave co mmu nicatio n:
Battery equalisation is performed using Gysflash CNT chargers in a Master/Slave configuration.
 One Gysflash (the Master) controls all the others (the Slaves).
Set up
1. Connecting the Gysflash to the SHM:
Connect each Gysflash to a channel on the SHM.
The Master G ysflas h must be connected to channel
The Slave Gys flashes units can be connected to channels
For Gysflash units manufactured before January 2024 (serial number less than 24.01.xxxxxx.
xxxxxx), please refer to the «SHM supplementary leaflet» available on the website www.gys.fr for
more details on the specific installation requirements for this version of charger.
2. Gysflash configuration:
Turn on all the Gysflash units. For each Gysflash, open the Multi-charger menu (see Gysflash manual) and select
the appropriate configuration:
LCD
Multi-chargers
Equalize
Translation of the original
instructions
OLED
Multi-charger
Equalize
2 c h a r g er s
x2
Slave 1 Slave 2
(FIG II).
1
, , or (FIG II).
2 3 4
For each charger, select «Equalize», as
well as the number of chargers you want to
equalise.
SMART HUB MODULE
Slave 3
15