-
Incorrect use and storage (explicit reference that the rules described in the operating
instructions have not been followed).
-
Customer wear (for example, broken saw blades, worn carbon brushes, etc.).
-
Secondary wear and damage due to lack of maintenance, repair, lubricants (for
example, damage from overheating due to blocked cooling slots, bearing damage as a
result of dirt, frost damage, etc.)
-
Damage as an obvious result of overuse/overloading.
-
Damage caused by inappropriate supplies (eg wrong fuel)
-
Load-induced failure of housing components or accessories due to abnormal stress
-
Load-induced deformation of housing components or accessories due to abnormal
stress.
-
Damage resulting from the operation of supplies that are overfilled or leaking due to
improper storage, in proper cleaning agents or other damaging chemicals.
-
Damage due to improper exposure to extreme temperatures (for example, freeze
fractures, thermal distortion of components, etc.)
-
Damage from permanent exposure to ultraviolet radiation.
-
Damage caused by improper maintenance.
-
Any damage caused by non-compliance with the instruction manual
-
Any product that has been attempted to be repaired by an unqualified professional.
-
Any product connected to an inadequate power source (amps, voltage, frequency).
-
Any damage caused by external influences (water, chemicals, physics, shock) or
foreign substances.
-
Use of inappropriate accessories or parts.
-
It does not include defects of normal wear parts, nor does it cover damages or defects
resulting from abuse, accidents or alterations, nor transportation costs.
Also, the warranty is void if the product has been altered or modified, or if the trademark/serial
number on the machine has been defaced or removed.
Routine maintenance, tune-ups, adjustments or normal wear and tear are not covered under
this warranty.
This manual does not cover all possible situations regarding warranty exclusions, for more
information contact your nearest Anova dealer.
7.3. In case of incident
The guarantee must be correctly completed with all the information requested, and
accompanied by the purchase invoice.
Anova reserves the right to deny any claim where purchase cannot be verified or where it is
clear that the product was not maintained properly (maintenance, vents cleaned, lubrication,
carbon brushes regularly maintained, cleaning, storage, etc.). .
Private use is understood as personal domestic use by a final consumer. Instead, commercial
use means all other uses, including uses for commercial, income-generating, or rental
purposes. Once the product has been used for commercial use, it will hereafter be considered
a commercial use product for the purposes of this warranty.
These are our standard warranty terms, but occasionally there may be additional warranty
coverage not determined at the time of publication. For more information, contact your nearest
official Anova distributor or by visiting www.millasur.com.
18
EN