Step 3 - Attach The Tow Bar To The Oil Tank; Step 4: Attach The Hydraulic Cylinder; Step 5: Push The Cylinder To The Correct Position - Anova RLT22GVH Manual De Usuario

4.2.3. Step 3 - Attach the Tow Bar to the Oil Tank

Attach the towbar to the oil tank using M12x80 Hex Bolts (35) and M12 Locknuts (23).
−

4.2.4. Step 4: Attach the hydraulic cylinder

Assemble the main beam to the drawbar using the pin (57) and the R-pin (20).
−

4.2.5. Step 5: Push the cylinder to the correct position

Slide pin R (step 1)
−
Remove two pins (step 2)
−
− Push the wedge into the correct position
(step 3).
10
EN