Descargar Imprimir esta página

Anova RLT22GVH Manual De Usuario página 96

Rompedor de leña a gasolina

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

4.2.8. Step 8: Connect the hydraulic hoses
Connect all hoses to the machine, including the A oil hose (#15), B oil hose (#9), C oil
hose (#17), and the oil inlet hose (#39).
4.2.9. Step 9 - Attach Wheel Fender and Log Rack
Attach the left and right fender (60) to the oil tank using an M8x16 Hex Bolt (59), Ø8
Flat Washer (55), and an M10 Hex Lock Nut (48).
Attach the left and right cradles/log support (72) using the M10x25 Bolt (73) and M10
Locknut (23).
4.3. Start up
-
Make sure the machine is correctly assembled.
-
Before each use of the machine, make sure that:
o There are no faulty connections (tears or cuts etc.).
o It does not use faulty electrical cables.
o The machine has not been damaged.
o All nuts are tight.
o There are no leaks from the hydraulic system.
o Check the oil level.
12
EN

Publicidad

loading

Productos relacionados para Anova RLT22GVH