Intellinet Network Solutions IPS-54GM06-10G-450W Manual De Instrucciones página 3

Instructions
Connections
• All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
• Cat5e/6/6a/8.x UTP/STP cables provide optimal performance;
if a status LED doesn't indicate a link or activity, check the
corresponding device for proper setup and operation.
• Use the included power cable to connect the receptacle
on the back of the switch to a power outlet.
LED Color
PWR Green
RUN Green
1–48
Link/ Green
PoE*
49S–54S
Green
(SFP+)
* NOTE: Press the CTRL button to alternate between Link or PoE Status.
Basic Web-Based Browser Management
1 Open your Web browser.
2 Enter http:// and the IP address of the switch in the Address
field. The default management IP address is 192.168.2.1.
3 Press Enter to display the login screen. In the Username
field, enter admin; in the Password field, enter the serial
number on the bottom of the switch. Click OK.
Status
Flashing The LEDs of ports 1 – 48 are showing PoE status.
Off The LEDs of ports 1 – 54 are showing Link status.
Flashing
On System has booted successfully.
Valid port connection. / The connected
On
device (PD) is receiving power.
Flashing
No link established. / No powered device
Off
(PD) is connected to the port.
On
Flashing
Off
Operation
System is booting.
Data transmitted/received.
Valid port connection.
Data transmitted/received.
No link established.
*
English 3