Publicidad
Idiomas disponibles
Idiomas disponibles
•
Never spray water into the indoor air conditioner. This could cause an electric
shock or a malfunction of the unit.
•
After removing the filter, do not touch the fins of the appliance as this may
cause injury.
•
Never use fire or a hair dryer to dry the filter after cleaning, as this could deform
it or cause a fire hazard.
•
Maintenance must be carried out by personnel qualified to do so, otherwise
damage to property and/or personal injury may occur.
•
Do not attempt to repair the unit yourself as this may result in a risk of electric
shock or damage to the unit. Contact the after-sales service if the appliance
needs to be repaired.
•
Never insert your fingers or other foreign objects into the air inlets and
outlets, as this could cause damage to property and/or personal injury.
•
Do not block the air inlets and outlets under any circumstances, as this could
cause malfunctions.
•
Never spill water on the remote control as this could damage it.
•
If the air conditioner is used under abnormal conditions, it may cause
malfunction, electric shock or fire hazard.
•
When you switch the unit on or off by pressing the emergency button, press it
with a well-insulated object and never with a metallic object.•
•
Never stand on the top cover of the appliance or place heavy objects on it, as
this could cause damage to property and/or personal injury.
•
Keep ventilation openings clear of obstruction. Do not reach into air outlets or
insert any foreign objects in the caravan air conditioner.
•
Installation must be carried out by persons qualified to do so. Damage to
property and/or personal injury may occur if the installation is not carried out
by qualified persons.
•
The regulations for electrical safety must be taken into account when
installing the unit.
•
Ensure that power supply switches and circuit breakers are installed and used
in accordance with local safety regulations.
•
Install a circuit breaker. If you do not install a circuit breaker, the unit may
malfunction.
•
An all-pole circuit breaker, with a distance of at least 3 mm between the poles,
should be installed in the fixed wiring.
•
The appliance should be fully earthed. Insufficient earthing can lead to a risk
of electric shock.
•
Only use the power cord that is recommended by the manufacturer.
•
Do not use extension cords.
•
Make sure that the power supply meets the requirements of the appliance.
Insufficient power supply or incorrect wiring may cause malfunction of
the appliance. Install the correct power cables and cords before using the
appliance.
•
Connect the current-carrying wire, the neutral wire and the earth wire
correctly.
•
Make sure that you disconnect the unit from the power supply before carrying
out any electrical work.
•
Do not insert the power cord of the appliance into the wall socket until the
EN
31
Publicidad
