Publicidad
Idiomas disponibles
Idiomas disponibles
EN
42
you set as you press TIMER button. If the timer button is not pressed, the unit
will work continuously.
2.
By pressing the timer but without turning on the other functions, you can PRE-
SET the time for the machine to work. For example, if you press the timer to
„2", the unit will work automatically after 2 hours.
Sleep function
1.
In cooling mode, by pressing the SLEEP button, the set temperature will
increase 1oC(2 oF) at the 1st hour, another 1 oC (2 oF) at the second hour,
then keeps at that temperature.
2.
In sleep mode, the ventilation will keep at low speed. Re-press the SLEEP
button, the setting temperature and ventilation speed will return to the pre-
selected one.
3.
The unit will shut down automatically after the SLEEP function running for 12
hours.
4.
Please note, the sleep function is not available while the machine is working in
AUTO, FAN (ventilation) or DEHUMIDIFICATION mode.
5.
When the machine is in Sleep function, the Fan Speed would turn to be LOW
speed.
Dehumidify (DRY) mode
In dehumidify (DRY) mode, the temperature cannot be adjusted, the ventilation
will fix at low speed. When ambient temperature below or equals to 15 °C,
compressor cut out automatically and dehumidify (DRY) mode stopped.
Dehumidify (DRY) mode operates normally when ambient temperature higher
than or equals to 17 °C.
Note: All the above functions can also be performed with the supplied remote
control.
Note: To prolong the compressor's life, after switching off of the unit, please
wait for 3 minutes (at least) before switching it on again.
The cooling system will switch off if the ambient temperature is lower than the
set one. The ventilation, however, keeps working on the set level. If the ambient
temperature rises above the selected level, the cooling will return to work.
Publicidad
