EN
20
•
The unit shall be installed in accordance with national wiring regulations.
•
Do not use means to accelerate the defrosting process or to clean, other than
those recommended by the manufacture.
•
The appliance shall be stored in a room without continuously operation
sources (for example: open flames, an operating gas appliance or an
operating electric heater).
•
The appliance shall be stored so as to prevent mechanical damage from
occurring.
•
Do not piece or burn, even after use.
•
Be aware that refrigerants may not contain an odour.
•
Pipe-work shall be protected from physical damage and shall not be installed
in an unventilated space, if that space is smaller than 4m².
•
Compliance with national gas regulations shall be observed.
•
Keep any required ventilation openings clear of obstruction.
•
The appliance shall be stored in a well-ventilated area where the room size
corresponds to the room area as specified for operation.
Any person who is involved with working on or breaking into a refrigerant
circuit should hold a current valid certificate from an industry-accredited
assessment authority, which authorizes their competence to handle refrigerants
safely in accordance with an industry, recognized assessment specification.
Servicing shall only be performed as recommended by the equipment
manufacturer. Maintenance and repair requiring the assistance of other skilled
personnel shall be carried out under the supervision of the person competent in
the use of flammable refrigerants.
If you don't understand something or need help, please contact the dealer
services
WARNING
Risk of explosion, injury or death
This unit uses a flammable refrigerant.
If the refrigerant leaks and comes in contact with fire or
heating part, it will create harmful gas and there is risk of
fire.