Publicidad
Idiomas disponibles
Idiomas disponibles
Skimmer Infinity
General instruction for installation
Place the skimmer in the pool structure in accordance with your pool supplier's instructions. Skimmers are normally placed
with inlets on the opposite side. During installation, stainless steel tools with clean contact surfaces must be used.
Store the products in their original packaging until installation, to prevent scratches and stains. Take care to avoid scratching
the product during installation.
Drainage
1. The drainage pipe is glued in the pipe muff with
suitable PVC adhesive.
2. Fit the pipe and pipe muff in the skimmer using
the enclosed gasket and nipple.
3. Connect pipe fittings to the overflow.
NOTE!
The edge and ground cover must NOT have joints where the skimmer is placed.
Decking should have support on the sides of the skimmer. The decking should be at least 28 mm thick.
M20658
Bild 11 - med delad fram kant - EJ OK installation
The paving stones should be at least 30 mm thick.
Skimmer Infinity
Porcelain ceramics should be at least 20 mm thick.
F-F ( 1 : 3 )
M20658
Bild 11 - med hel fram kant - OK installation
Skimmer Infinity
F
9
ENGLISH
14. Drainage pipe
15. Pipe muff
16. Nipple
with gasket
F
Publicidad
