Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the Fan Blades
WARNING: To reduce the risk of personal
injury, do not insert foreign objects between
rotating fan blades.
Step 1. Align the holes from the blade to the holes
from the fan motor assembly, and secure the blade
in place with blade support plate with blade
attachment screws and lock washers provided.
(Fig. 11)
Step 2. Repeat this process to attach the other two
blades.
Blade support
plate with
screws and
lock washers
Figure 11
7. Installing the Light Kit
Installing the LED Assembly
CAUTION:
Before starting installation, disconnect
the power by turning off the circuit breaker or
removing the fuse at fuse box.Turning power
off using the fan switch is not sufficient to
prevent electric shock.
NOTE:
If the light kit could be wobbled by hand,
it means the light kit is not twisted completely till
the right position. Keep twisting the light kit till it
could not be wobbled by hand.
Step 1.
While holding the 20W LED light kit
under the fan motor assembly, snap together the
wire connection plugs :
(Fig. 12)
- White to white
- Black to black
Step 2. Position the notches in the inner edge of
the 20W light kit assembly so they line up with
the tabs on the outer of the rim of the light kit
mounting plate. Secure it to the fan by turning the
20W light kit assembly clockwise until snug.
Tabs
Wire connectors
Notches
Figure 12
Light kit
mounting plate
20 W LED
assembly
Publicidad
