Publicidad
Idiomas disponibles
Idiomas disponibles
Finishing the Fan
Installation
Step 1.
Remove two of the four mounting plate
screws with lock washers from the mounting plate
and loosen the other two screws with lock
washers. (Do not remove)
Step 2.
Remove the fan motor assembly from the
mounting plate hook, and engage the key holes on
the fan motor assembly with the two mounting
plate screws with lock washers previously
loosened.
Step 3.
Install the two mounting plate screws with
lock washers previously removed, and tighten all
four mounting plate screws with lock washers.
(Fig. 9)
Mounting
bracket
Figure 9
Step 4.
Secure motor housing to fan motor. Install
motor housing to fan motor and align the slots
with two loosen screw form previous step. Install
two screws from previous step and tighten all four
screws to secure motor housing to fan motor. (Fig.
10).
Tighten
Screws
Screws
Figure 10
Fan
Motor
Fan
Motor
Motor
Housing
Tighten
Screws
6.
Publicidad
