Progress Lighting AirPro P250121 Manual De Instalación página 7

Hanging the Fan
REMEMBER to turn off the power. Follow the
steps below to hang your fan properly.
Step 1. Attach the mounting bracket to the outlet
box with two screws and washers provided with
the outlet box. Make sure the bracket is tight and
secured. (Fig. 4)
Step 2.
Connect the receiver black and white
wires to the supply black and white wires using
the plastic wire nuts. (Fig. 5)
Step 3. Install the receiver to the mounting bracket
by snap in the receiver to receiver holder. (Fig. 5)
Figure 4
Receiver holder
Receiver
Figure 5
Removing the Motor
Housing
Outlet box
Step 1. The fan motor assembly is shipped with
rubber packing mounts to prevent movement
during transportation. Remove the six rubber
packing mounts screws from the fan motor
assembly and discard. (Fig. 6)
Step2. Loosen two screws and remove two
Mounting
remaining screws to remove motor housing from
bracket
fan motor. (Fig. 6)
Screws
Outlet box
Screws
Loosen
Screws
Figure 6
Rubber packing
mounts
Fan
Motor
Motor
Housing
Remove
Screws
4.