FUXTEC FX-RM5170PRO Manual De Instrucciones Originales página 50

Original-Bedienungsanleitung FUXTEC Benzin-Rasenmäher FX-RM5170PRO_de_en_fr_ita_es_rev1
• Check the spark plug. Replace it if the electrodes are worn, or the insulator is cracked or
fissured.
• Measure the spark plug electrode gap with a suitable gauge. Correct the space by carefully
bending the side electrode with a suitable tool if necessary. The distance should be 0.028 ~
0.031 inch (0.7 ~ 0.8 mm).
• Insert the spark plug carefully by hand to avoid overtightening.
• Place the spark plug cap on the spark plug.
Caution: A loose spark plug can overheat and damage the engine. Tightening the spark plug too
tightly can damage the thread in the cylinder head.
Adjusting the cables
Before the device is put into operation, the rope setting should always be checked.
The cables can be checked by fully operating the handles and checking that the cable is taut. If it is
not, it must be tightened. The cable should be loosened if the handle cannot easily be entirely
operated.
After the first season, expect to adjust the cables for optimal activation, as the cables may stretch
with use.
Readjustment may be necessary for the following cables:
1. cable for the drive
2. cable for the engine brake
3. cable for the throttle cable
Sealing ring
50