bosal 005-568 Instrucción De Montaje página 4

There are plug joints on both tail lights. Disconnect them:
6.
a) Connect joint of connection bunch with EODFNgreen cables to right tail lights and connect original vehicle plug
to this connection,
b) Connect plug joint with greyZKLWH cable in an empty place of left tail lights, connect joint of connection bunch
with EODFNZKLWH, JUH\ and additionally EOXH/red cables in 13-polar set to assembled joint and then connect original
plug of left tail lights set,
c) Only in 13-polar set. Connect ZKLWHEURZQ 2,5 mm
eyelet terminal with sheet metal screw; do not secure the hole with anti-corrosion agent).
7. Draw part of connection bunch from left side of boot through vehicle interior to instrument panel:
D) Disassemble plug connections of stop switch (by stop pedal), connect connection bunch joint to empty slot,
connect previously assembled connections to connection bunch joint,
E) Disassemble fuse base cover. Remove and turn fuse base set around. Draw two leads of connection bunch
(JUH\EODFN JUH\UHG) with eyelet terminal over left, lower side to electric part and connect in the following way:
Colour
*UH\EODFN
*UH\UHG
c) after connecting leads reassemble fuse base.
8. Trailer power supply:
Only for 13-polar version. 3-input housing (red/blue, yellow and ZKLWHbrown leads) is provided for expanded
socket functions. Put this part of lead bunch behind the trim. To expand socket functions it is necessary to order
the following parts:
Function "current supply and earth"
Function "current supply, charge line and earth" part no. 015-069
Fix all the leads with supplied band clips, assemble previously disassembled parts.
Connect accumulator and check all vehicle functions with connected trailer or other suitable testing device.
No of fuse output
 output (left standing light)
 output (right standing light)
2
cable to earth (e.g. drill a 3 mm hole, connect and fix it the
Lead colour on output
Jrey/black
grey/UHG
part no. 014-169