Blackmagic Design HyperDeck Extreme 4K HDR Manual De Instrucciones página 1163

Command
A - Advanced Media Protocol
0xA1 0x01 AutoSkip
0xAX 0x15 ListNextID
0x20 0x29 ClearPlaylist
0x41 0x42 SetPlaybackLoop
0x41 0x44 SetStopMode
0x4f 0x16 AppendPreset
Blackmagic Extensions
0x82 0x02 BMDSeekToTimelinePosition
0x81 0x03 BMDSeekRelativeClip
0x87 0x04 BMDScrubTimelineDelta
Reply No Remote
Acknowledge Disabled
IDListing Enabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Acknowledge Disabled
Notes
8-bit signed number of
clips to skip from current
clip
when x = 0 single clip
request when x = 1, #
clips can be specified in
the send data
Bit 0 loop mode enable,
0=false 1=true
Bit 1 is single clip/timeline
0=single clip
1=timeline
0 = Off
1 = Freeze on last frame
2 = Freeze on next clip
3 = Show black
2 Bytes for the length N
of the clip name
N Bytes for each character
of the clip name
4 Byte in point timecode
(format is FFSSMMHH)
4 Byte out point timecode
(format is FFSSMMHH)
16-bit big endian fractional
position [0..65535]
One-byte signed integer,
which is the number of
clips to skip (negative for
backwards).
1 Byte unsigned integer,
which is the whence, where
0 = Set
1 = Current
2 = End
4 Byte 32bit big endian
unsigned integer, which is
the delta to scrub by.
1 Byte signed integer,
which is the delta's sign,
where a value less than 0
will set the delta scrub to a
negative value.
1 Byte unsigned integer,
which is the unit of time to
scrub by, where
0 = Frames
1 = Milliseconds
Controllo RS-422 1163