Sony BRAVIA FW-65BZ30J Guía De Referencia página 3

• Install the LCD Monitor so that the LCD Monitor's Table-Top
Stand does not protrude out from the LCD Monitor stand (not
supplied). If the Table-Top Stand protrudes out from the LCD
Monitor stand, it may cause LCD Monitor set to topple over, fall
down, and cause personal injury or damage to the LCD Monitor.
Transporting
• Before transporting the LCD Monitor, disconnect all cables.
• Two or more people (four or more people for FW-100BZ40J) are
needed to transport a large LCD Monitor.
• When transporting the LCD Monitor by hand, hold it as shown
below. Do not put stress on the LCD panel and the frame around
the screen.
• When lifting or moving the LCD Monitor, hold it firmly from the
bottom.
FW-100BZ40J
FW-75BZ30J / 65BZ30J / 55BZ30J1 / 55BZ30J / 50BZ35J /
50BZ30J / 43BZ35J / 43BZ30J / 32BZ30J
• When transporting the LCD Monitor, do not subject it to jolts or
excessive vibration.
• When transporting the LCD Monitor for repairs or when moving,
pack it using the original carton and packing material.
Topple prevention
FW-100BZ40J
1
M6 screw (not
supplied)
Screw hole on the LCD
Monitor's Table-Top Stand
3
Screw (not supplied)
FW-75BZ30J / 65BZ30J / 55BZ30J1 / 55BZ30J / 50BZ35J /
50BZ30J / 43BZ35J / 43BZ30J
1 2
4
Screw (not supplied)
FW-32BZ30J
1 2
4
Screw (not supplied)
10 mm – 20 mm
2
1.5 N·m
{15 kgf·cm}
M6 screw
(not supplied)
Cord (not
supplied)
10 mm – 12 mm
VS
M6 screw
(supplied)
(not supplied)
1.5 N·m
{15 kgf·cm}
Cord (not supplied)
10 mm – 12 mm
M6 screw
(not supplied)
1.5 N·m
{15 kgf·cm}
Cord (not supplied)
3
GB
GB