Publicidad
Idiomas disponibles
Idiomas disponibles
English
MAINTENANCE AND INSPECTION
CAUTION
Pull out battery before doing any inspection or maintenance.
1. Inspecting the accessories
Using a tip tool or mandrel with a worn or
damaged end will not only result in a poor
fi nish, but will place unreasonable strain on the
motor, causing reduced effi ciency, damage or
injury.
If the tip tool or mandrel is worn or damaged,
replace it.
2. Check the screws
Loose
screws
inspect them and make sure they are tight.
CAUTION
Using this power tool with loosened,
screws is extremely dangerous.
3. Check for dust
Dust may be removed with a soft cloth or a
cloth dampened with soapy water.
Do not use bleach, chlorine, gasoline or
thinner, for they may damage the plastics.
4. Disposal of the exhausted battery
WARNING
Do
not
dispose
battery. The battery must explode if it is
incinerated. The product that you have
purchased
contains
battery. The battery is recyclable. At
the end of it's useful life, under various
state and local laws, it may be illegal to
dispose of this battery into the municipal
waste stream. Check with your local solid
waste offi cials for details in your area for
recycling options or proper disposal.
5. Storage
Storing in a place below 104°F (40°C) and out
of the reach of children.
NOTE
Make sure that the battery is fully charged
when stored for a long period (3 months or
more). The battery with smaller capacity may
not be able to be charged when used, if stored
for a long period.
20
are
dangerous.
Regularly
of
the
exhausted
a
rechargeable
6. Service and repairs
All quality power tools will eventually require
servicing or replacement of parts because
of wear from normal use. To assure that only
authorized replacement parts will be used, all
service and repairs must be performed by a
HITACHI AUTHORIZED SERVICE CENTER,
ONLY.
7. Service parts list
CAUTION
Repair, modifi cation and inspection of
Hitachi Power Tools must be carried out by
a Hitachi Authorized Service Center.
This Parts List will be helpful if presented
with the tool to the Hitachi Authorized
Service Center when requesting repair or
other maintenance. In the operation and
maintenance of power tools, the safety
regulations and standards prescribed in
each country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being
improved and modifi ed to incorporate the latest
technological advancements.
Accordingly, some parts may be changed
without prior notice.
Publicidad
