Publicidad
Idiomas disponibles
Idiomas disponibles
c) When battery pack is not in use, keep
it away from other metal objects like
paper clips, coins, keys, nails, screws,
or other small metal objects, that can
make a connection from one terminal to
another.
Shorting the battery terminals together may
cause burns or a fi re.
d) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
fl ush with water. If liquid contacts eyes,
additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a
qualifi ed
repair
identical replacement parts.
This will ensure that the safety of the power
tool is maintained.
WARNING
Some dust created by power sanding, sawing,
grinding,
drilling,
activities contains chemicals known [to the State
of California] to cause cancer, birth defects or
other reproductive harm. Some examples of
these chemicals are:
Lead from lead-based paints,
⦁
Crystalline silica from bricks and cement
⦁
and other masonry products, and
Arsenic and chromium from chemically-
⦁
treated lumber.
Your
risk
from
these
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed to
fi lter out microscopic particles.
SAFETY WARNINGS FOR
GRINDING OPERATIONS
a) This power tool is intended to function
as a grinder. Read all safety warnings,
instructions, illustrations and specifi cations
provided with this power tool.
Failure to follow all instructions listed below
may result in electric shock, fi re and/or serious
injury.
person
using
and
other
construction
exposures
varies,
b) Operations
brushing or polishing or cutting-off are not
recommended to be performed with this
power tool.
Operations for which the power tool was not
designed may create a hazard and cause
personal injury.
c) Do not use accessories which are not
specifi cally designed and recommended
by the tool manufacturer.
Just because the accessory can be attached
to your power tool, it does not assure safe
operation.
d) The rated speed of the accessory must
be at least equal to the maximum speed
marked on the power tool.
Accessories running faster than their rated
only
speed can break and fl y apart.
e) The outside diameter and the thickness of
your accessory must be within the capacity
rating of your power tool.
Incorrectly
adequately guarded or controlled.
f) The arbour size of wheels, fl anges, backing
pads or any other accessory must properly
fi t the spindle of the power tool.
Accessories with arbour holes that do not
match the mounting hardware of the power tool
will run out of balance, vibrate excessively and
may cause loss of control.
g) Do
not
Before each use inspect the accessory
such as abrasive wheels for chips and
cracks. If power tool or accessory is
dropped, inspect for damage or install an
undamaged accessory. After inspecting
and
installing
yourself and bystanders away from the
plane of the rotating accessory and run the
power tool at maximum no-load speed for
one minute.
Damaged accessories will normally break apart
during this test time.
h) Wear
personal
Depending
shield, safety goggles or safety glasses.
As appropriate, wear dust mask, hearing
protectors, gloves and workshop apron
capable of stopping small abrasive or
workpiece fragments.
The eye protection must be capable of stopping
fl ying debris generated by various operations.
The dust mask or respirator must be capable of
fi ltrating particles generated by your operation.
Prolonged exposure to high intensity noise may
cause hearing loss.
such
as
sanding,
sized
accessories
use
a
damaged
an
accessory,
protective
on
application,
English
wire
cannot
be
accessory.
position
equipment.
use
face
5
Publicidad
