Publicidad
Idiomas disponibles
Idiomas disponibles
Selecting Cooktop Settings
Choose the element/burner that is best fit to the
cookware size. Each element/burner on your new
cooktop has its own power levels ranging from low to
high. Power level settings necessary for cooking will vary
depending on the cookware being used, the type and
quantity of food, and the desired outcome. In general
use lower settings for melting, holding and simmering
and use higher settings for heating quickly, searing
and frying. When keeping foods warm confirm selected
setting is sufficient to maintain food temperature above
140°F. Larger elements and elements marked "Keep
Warm" are not recommended for melting.
Hi is the highest power level, designed for large quantity
rapid cooking and boiling. Hi will operate for a maximum
of 10 minutes. Hi may be repeated after the initial 10
minute cycle by pressing the + pad.
How To Synchronize Left Elements
NOTE: Sync Burners is only intended for cookware that spans both burners.
To Turn On
Touch the Sync Burners pad to connect the two
burners. Operate either element as previously described
to adjust power level.
49-2001131 Rev. 2
CAUTION
Do not place any
cookware, utensils or leave excess
water spills on control key pads. This
may result in unresponsive touch
pads and turning off the cooktop if
present for several seconds.
NOTE: The warm setting may not
glow bright red like the other heating
operations.
To Turn Off
1. Touch the On/Off pad on either burner to turn off the
Sync Burners.
or
2. Touch the Sync Burners to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
Low
melting
7
Publicidad
