FRECAN Flow 4.4-60 Instrucciones De Uso página 134

Automatic function
This function adjusts automatically the power level of the hood depending on the power level of the
cooking zones.
• Activate / deactivate the automatic function:
Action
Activate the automatic function Press 3 seconds on the hood selection
deactivate the automatic
function
Note: it is possible to quickly change the power of the hood when the automatic function is
activated, by sliding your finger on the "SLIDER".
This temporarily stops the automatic function.
The automatic function is reactivated the next time the hob is started.
MAINTENANCE AND CLEANING OF THE HOOD
Regular cleaning of the hood guarantees correct and error-free operation and extends the life of the
hood. Be sure to clean the grease filters according to the manufacturer's recommendations.
Filter cleaning indicator
When the hood is on and the suction power is set to [0], the time remaining before cleaning the filter
is displayed on the timer display.
The default setting is 30 hours, but you can change this setting if you want.
• Show the remaining time:
Action
Activate the hood
• Grease filter cleaning indicator:
When the grease filters are to be cleaned, the timer display shows [00h] and a dot flashes on the
hood selection key.
• Reset the time remaining before cleaning the hood filter
Action
Activate the hob
Select the hood
Reset the counter
Confirm the setting
•
Control panel
key
Press 3 seconds on the hood selection
key
Control panel
Press on the hood selection key
Control panel
Press key [ ] for 2 sec
Press on the hood selection key
Press on the timer key for 3 secondes The last user-specified
Press on the timer key again
134
EN
Display
[ A ]
[ 0 ]
Display
[remaining time] on the
timer display
Display
[ 0 ] and a dot flashes on
the hood selection key
[ 0 ] and [ 00h ] on the
timer display
setting is activated
-