FRECAN Flow 4.4-60 Instrucciones De Uso página 138

One or all cooking zone cut-off:
• The safety system functioned.
• You forgot to cut-off the cooking zone for a long time.
• One or more sensitive keys are covered.
• The pan is empty and its bottom overheated.
• The hob also has an automatic reduction of Booster level and breaking Automatic
overheating
Continuous ventilation after cutting off the hob:
• This is not a failure, the fan continuous to protect the electronic device.
• The fan cooling stops automatically.
The automatic cooking system doesn't start-up:
• The cooking zone is still hot [ H ].
• The highest Booster level is set [ 9 ].
The control panel displays [ U ]:
• Refer to the chapter "Keep warm".
The control panel displays [ L ]:
• Refer to the chapter control panel locking page.
The control panel displays [ II ]:
• Refer to the chapter "Stop&Go"
The control panel displays [
• An object or liquid covers the control keys. The symbol disappear as soon as the key is
released or cleaned.
The control panel displays [ E2 ] or [ EH ] :
• The hob is overheated, let it cool and then turn it on again.
The control panel displays [ E3 ] :
• The pot is not adapted.
The control panel displays [ E6 ] :
• The supply voltage is outside the permissible range (voltage and/or frequency). Check the
connection and switch on the hob.
The control panel displays [ E8 ] :
• The air inlet of the ventilator is obstructed, release it.
If no error code is displayed and the user interface does not respond to any key press, check
the supply voltage for missing wires, missing bridges and incorrect connection to 400 V.
If one of the symbols above persists, call the After-Sale Service.
] or [ Er03 ] :
138
EN