Electrolux ENV9MD18S Manual De Instrucciones página 12

12 www.electrolux.com
The MultiSwitch
compartment reaches the
set temperature after 24 h.
Wait until the MultiSwitch
compartment has reached
the set temperature before
using it.
The High temperature alarm starts
working again one hour after deactivating
the MultiSwitch function.
4.9 ECO function
The ECO function sets the optimal
temperature to ensure food preservation
while minimizing energy consumption.
1. To activate the function press the
ECO button.
The fridge temperature is set to +4°C
and the freezer temperature to -18°C.
2. To deactivate the function, press the
ECO button again or select a
different set temperature (refer to
"Temperature regulation").
After deactivating the ECO function, the
fridge temperature is set to +2°C and the
freezer temperature to -20°C.
Activation of the ECO
deactivates Extra Cool and
Extra Freeze functions.
The ECOMETER indicator
shows the appliance's
current energy consumption.
Three fully lit bars indicate
the most energy-efficient
setup.
4.10 Extra Cool function
With the Extra Cool function, you may
rapidly cool large amounts of warm food,
for example after doing grocery
shopping, without warming food already
stored in the fridge compartment.
To activate the function, press the Extra
Cool button.
The Extra Cool indicator lights up. When
the Extra Cool function is on, the fan may
work automatically.
This function stops automatically after
approximately 6 hours. Once the function
is off, the Extra Cool indicator goes out.
Press the Extra Cool button to deactivate
the Extra Cool function before it
automatically ends.
To set a different fridge
temperature, switch off the
Extra Cool function and refer
to "Temperature regulation".
4.11 MultiChill 0° drawer setting
The Meat & Fish and the Fruit & Veg are
the factory settings optimized for
preservation of fresh food.
Meat & Fish
To activate the function, tap
The MultiChill 0° drawer ensures optimal
temperature for preserving meat and
fish.
If the refrigerator temperature is set to
7°C or 8°C with the Meat & Fish function
activated, the refrigerator temperature
automatically changes to 6°C.
Fruit & Veg
To activate the function, tap
The MultiChill 0° drawer ensures optimal
temperature for preserving packed fruits
and vegetables.
Single Level Selection
You can set different temperature levels
in the MultiChill 0° drawer.
1. Press and hold
simultaneously for 3 seconds to
access the Single Level Selection.
The Fridge temperature indicator
shows . The Freezer temperature
indicator shows the currently set
temperature level.
2. Tap the Freezer temperature button
to change the temperature level
between 1 and 5. Level 1 is the
coldest, while level 5 is the warmest.
3. To exit the Single Level Selection,
press and hold
simultaneously for 3 seconds. If you
do not press any button for 5
.
.
and
and