Publicidad
Idiomas disponibles
Idiomas disponibles
seconds, the setting turns off
automatically.
After exiting the Single Level
Selection setting, you can
restore the default
temperature level by
pressing
4.12 Extra Freeze function
Extra Freeze function is used to pre-
freeze and fast freeze in sequence in the
freezer compartment. This function
accelerates the freezing of fresh food
and, at the same time, protects
foodstuffs already stored from
undesirable warming.
To freeze fresh food,
activate the Extra Freeze
function at least 24 hours
before placing the food to
complete pre-freezing.
To activate this function, press the Extra
Freeze button.
The Extra Freeze indicator lights up. The
Extra Freeze function stops automatically
after a maximum of 52 hours.
Press the Extra Freeze button to
deactivate the Extra Freeze function
before it automatically ends.
4.13 High temperature alarm
When the temperature in the freezer
compartment increases (for example due
to an earlier power failure), the alarm
indicator flashes, the freezer temperature
indicator shows H° and blinks and the
sound is on.
To deactivate the alarm, press any
button.
The alarm indicator and sound go off.
The freezer temperature indicator shows
H° for 5 seconds before indicating the
freezer temperature again.
or
.
The alarm restarts one hour
after deactivation until the
normal conditions are
restored.
If you do not press any
button, the sound switches
off automatically after
around one hour to avoid
disturbing.
4.14 Door open alarm
If the fridge door is left open for
approximately 5 minutes or if the freezer
door is left open for approximately 80
seconds, the sound is on and the door
open alarm indicator turns on. The
internal fridge light may also start
flashing.
The alarm stops after closing the door.
Press any button to switch off the sound.
If you do not press any
button, the sound switches
off automatically after
around one hour to avoid
disturbing.
4.15 APP indicator
If
appears on the display, there is
a function activated in the dedicated
application.
Refer to the mobile
application to manage the
functions.
If you are unable to access the mobile
application features, press and hold the
Connectivity button for 3 seconds to
disable the Wi-Fi connection. It stops the
functions activated in the application.
Refer to the "Resetting the
appliance wireless
connection " section to
restore the Wi-Fi connection.
4.16 Wi-Fi connectivity setup
This functionality allows you to connect
your appliance to Wi-Fi network and to
link it to your mobile device. With this
functionality you can receive
ENGLISH
13
Publicidad
