Parkside PLG 20 C3 Traducción De Instrucciones Originales página 25

Only charge the battery
(4) when the red LED on
the charge status indicator (3)
is on.
Recharging the battery
Allow a hot battery to
cool before charging.
Only charge the battery (4)
when the red LED on the
charge status indicator is on.
The charger has a cool-
ing fan.
1. Remove the battery (4) from
the appliance, as necessary
(see „Removing/inserting the
battery").
2. Insert the battery (4) in the
charging compartment of the
battery charger (5).
3. Plug the battery charger (5)
into a mains outlet.
4. Once charging is complete,
disconnect the charger (5)
from the mains supply.
5. Remove the battery (4) from
the charger (5).
Overview of the control
display on the charger:
Green LED (6) lights up without
battery­inserted:­
Charger ready.
Green LED (6) lights up:
Battery such alleged charged.
Red LED (7) lights up:
Battery charging.
Red­LED­(7)­flashes:
Battery overheated
Red­(7)­+­green­(6)­LEDs­flash:­
Defective battery
Storage
Store the appliance in a dry place
well out of reach of children.
Wall mounting for charger
(optional)
You can also fix the charger (5)
to the wall.
• Using dowels, place two
screws 102 mm apart at the
desired position of a wall.
• The screw head can have a
diameter of 7 - 9 mm.
• Leave the screw heads pro-
GB MT
25