Service And Maintenance - Ferroli SUN G10 2S Instrucciones De Uso, Instalación Y Mantenimiento

Quemador de gasóleo

Ocultar thumbs Ver también para SUN G10 2S:

Idiomas disponibles

SUN G10 2S

3. SERVICE AND MAINTENANCE

All the adjustment, commissioning and maintenance operations must be performed by Qualified Per-

sonnel, in compliance with the standards in force. The local sales organisation and Customer Service

Centre is available for any further information.

FERROLI S.p.A. declines all liability for damage to persons and/or things deriving from tampering with

the appliance by non-authorised persons

3.1 Settings

Head and air damper adjustment

The adjustment of the head depends on the flow-rate of the

burner. The head is adjusted by rotating the adjustment screws

"B" clockwise or anticlockwise until the notch on rod "A" is n

line with the reference.

This modifies the position of the baffle in respect to the drau-

ght tube, and as a consequence the flow of air.

To limit the amount of dispersion from the stack when

the boiler is off, the burner is fitted with a gravity-

closing air damper that closes automatically when the

burner stops.

1° stage:

to unloose the nut "1" and swivel the ring "2" till the desired value. To tighten the nut

"1".

2° stage:

to remove the cap "3" and swivel the screw "4" with a screwdriver till the desired value.

Reposition the cap.

fig. 8

Cod. 35445523 - 02/2007 (Rev. 00)

fig. 7

2nd - Stage

1st - Stage

Tabla de Contenido

Sun g10