Optika Italy IM Serie Manual De Instrucciones página 8

8. Assembling
8.1 Installing the objectives
1. Rotate the coarse focusing knob ① until the nosepiece
reaches its lowest position. (Fig. 1)
• For a safe transport, the nosepiece is placed in the low-
est position before shipment from the factory.
2. Screw the lowest magnification objective on to the nose-
piece, then turn the nosepiece clockwise. Mount the other
objectives in the same way, following the sequence from low
to high magnification. (Fig. 2)
• Clean the objectives regularly. In inverted microscopes,
the objectives are very sensitive to dust.
• To prevent dust and dirt from entering the microscope,
cover all the unused holes with dust caps ②. (Fig. 3)
8.2 Installing the stage plate
1. Install the stage plate in the stage opening. (Fig. 4)
Page 8
①
F ig. 1 F ig. 1
F ig. 2 F ig. 2
②
F F ig. 3 ig. 3
F ig. 4 F ig. 4