Optika Italy IM Serie Manual De Instrucciones página 9

8.3 Installing the eyepieces
1. Insert both eyepieces into the tubes of the optical head. (Fig.
5)
8.4 Installing the LED housing
1. Insert the LED housing and tighten the fixing screw ①. (Fig.
6)
2. Plug the power cable from the LED housing to the micro-
scope body, then screw the fixing ring. (Fig. 7)
8.5 Installing the filter holder
• The microscope is equipped with a filter holder located on the
back side of the microscope.
• The filter holder has three positions: ① filter holder for color
filters, ② frosted filter, ③ filter holder for color filters. (Fig. 8)
Page 9
① ② ③
F ig. 5 F ig. 5
F ig. 6 F ig. 6
F ig. 7 F ig. 7
F ig. 8 F ig. 8