Publicidad
Idiomas disponibles
Idiomas disponibles
ES
EN
FR
IT
6. CARE AND MAINTENANCE
The routine inspections listed below shall be carried out daily in the interests of safety.
The routine inspections listed below shall be carried out daily in the interests of safety.
1. Check for any damage or wear by visual inspection.
1. Check for any damage or wear by visual inspection.
2. Ensure that the lift arm bolts and nuts are securely fastened.
2. Ensure that the lift arm bolts and nuts are securely fastened.
3. Check if the lift arm hook is working properly.
3. Check if the lift arm hook is working properly.
4. Check the controller, actuator and base width adjustment.
4. Check the controller, actuator and base width adjustment.
5. Check emergency lowering function (both manual and electric).
5. Check emergency lowering function (both manual and electric).
If necessary, it is forbidden to clean the crane with chemicals containing phenol and chlorine, which may
If necessary, it is forbidden to clean the crane with chemicals containing phenol and chlorine, which may
cause damage to the plastic powder or plastic material.
cause damage to the plastic powder or plastic material.
Transport and storage:
Transport and storage:
Press the emergency stop button to transport or not to use the lift for a certain period of time.
Press the emergency stop button to transport or not to use the lift for a certain period of time.
The storage temperature of the crane should be above 0°C and relative humidity ≤60%.
The storage temperature of the crane should be above 0°C and relative humidity ≤60%.
Inspection:
Inspection:
Carry out a complete inspection at least once a year. Pay particular attention to worn parts, such as
Carry out a complete inspection at least once a year. Pay particular attention to worn parts, such as
connections and screws.
connections and screws.
7. PROBLEM SOLVING
DESCRIPTION
DESCRIPTION
Lift does not work (lifting and lowering)
Lift does not work (lifting and lowering)
DE
PT NL
SWE
PL DK
PROBLEM SOLVING
PROBLEM SOLVING
1. Check if the emergency stop button is pressed.
1. Check if the emergency stop button is pressed.
2. Check that the controller and actuator cables
2. Check that the controller and actuator cables
are properly connected.
are properly connected.
3. Check the battery level on the control box
3. Check the battery level on the control box
display.
display.
4. Check for any problems or damage to the
4. Check for any problems or damage to the
battery contact panel.
battery contact panel.
5. Request after-sales service if the lift still does not
5. Request after-sales service if the lift still does not
work.
work.
Electric Patient Lift
FORTUNA BASIC
17
Publicidad
