Publicidad
Idiomas disponibles
Idiomas disponibles
2. Remote control
The strip includes a remote control to also be able to make
use of it. These are the functions of the buttons.
1. ON/OFF button: Press this button to turn on or off the strip.
2. Light: Press this button to stabilize the illumination
without effects.
3. FAQS
The LED strip does not light up after connecting the
controller and power on.
1. Check the power input: Please use our supplied adapter or
any other power source which
is of the same type as our adapter. LED light must be used
under 12V voltage.
2. Check if the controller and the strip are properly
connected. Confirm all connections are
OK.
3. Check if the remote control is switched on.
The LED strip is on, but the remote controller is not
working or cannot control the LED light.
1. Check if the insulation plate is in the remote control.
2. Check if the battery of the remote control is well placed.
3. Confirm that you are within 5m and align with infrared
sensor.
4. Try to change the battery.
4. Warnings
• Please, strictly follow this user manual to install and use the
product to avoid accidents.
• Do not disrupt the product or modify any component.
• Turn off the power and the main electrical panel before
installing or doing maintenance tasks to avoid damage from
electric shock.
• Do not install the product on unstable or unsafe ceilings.
• Do not cover the product with blankets or similar objects.
• Do not handle any product component for installation,
repairing or checking unless you are a qualified electrician.
Wire connecting must follow IEE electric standard or any
other valid national standard.
• Do not install the product above hot or wet surfaces.
3.
Speed:
buttons to change the
speed of the light.
4. Brightness adjustment:
Press these buttons to
increase or decrease the
lighting brightness.
5.
Attenuation:
these buttons to increase
or
decrease
attenuation.
6. Modes: Press these
buttons to play with the
different effects.
Press
these
Press
the
Publicidad
